Goline Logo

News

  • Route RPKI validation April 1st, 2022
    RPKI is a security framework by which network owners can validate and secure the critical route updates or Border Gateway Protocol (BGP) announcements between public Internet networks. BGP is essentially the central nervous system of the Internet and one of its fundamental building blocks. The main function of BGP is to facilitate efficient routing between Autonomous Systems (AS), by building and maintaining the Internet routing table. The Internet routing table is effectively the navigation system of the Internet and without it, traffic would be unable to flow between its constituent networks. Unfortunately, routing equipment alone cannot distinguish between legitimate and malicious routing announcements,...
  • RIPE – Atlas Anchor February 17th, 2022
    We have become an even more integral part of the RIPE Atlas project by hosting an anchor, a device that allows for latency analysis of traffic between autonomous systems.https://atlas.ripe.net/probes/7073/RIPE Atlas anchors play an integral role in the RIPE Atlas network by acting both as enhanced RIPE Atlas probes with more measurement capacity, as well as regional measurement targets within the greater RIPE Atlas network. Anchors are able to perform many more measurements than a regular RIPE Atlas probe, and the large amount of data they collect is made available to everyone. In addition, anchors act as powerful targets that can...
  • MANRS June 20th, 2020
    GOLINE firmly believes in initiatives to protect networks, improve security and resilience of the global routing system. Therefore we decided to support the MANRS project and join as participants.Mutually Agreed Norms for Routing Security (MANRS) is a global initiative, supported by the Internet Society, that provides crucial fixes to reduce the most common routing threats. MANRS offers specific actions via four programs for Network Operators, Internet Exchange Points, CDN and Cloud Providers, and Equipment Vendors. Requirements for Participation Please read the full MANRS Actions document before applying. You can become a participant if you meet these requirements: You (or your company) support...

Cisco 10Gbit Module C3KX-SM-10G for 3750-X – version-mismatch

Miro Manglaviti Cisco 22 June 2022

Cisco 3750x FRULink 10G service module 

Errore mostrato
%PLATFORM_SM10G-3-SW_VERSION_MISMATCH: The FRULink 10G Service Module (C3KX-SM-10G) in switch 1 has a software version that is incompatible with the IOS software version. Please update the software. Module is in pass-thru mode.

Switch#sh switch service-modules
Switch/Stack supports service module CPU version: 03.00.78

Temperature CPU

Switch# H/W Status (CPU/FPGA) CPU Link Version
—————————————————————–
1 OK 75C/74C ver-mismatch 03.00.65

Installare il firmware 
Switch#archive download-sw flash:c3kx-sm10g-tar.152-4.E5.tar

Prima di riavviare il modulo, l'errore sulla versione compare ancora
Riavviare il modulo
switch 1 frulink reload

sh switch service-modules

Switch# H/W Status (CPU/FPGA) CPU Link Version
—————————————————————–

1 OK 75C/74C ver-mismatch 03.00.65
Switch#switch 1 frulink reload
TPB-12thFl-3750x#sh switch service-modules
Switch/Stack supports service module CPU version: 03.00.78
Temperature CPU
Switch# H/W Status (CPU/FPGA) CPU Link Version

—————————————————————–
1 OK 71C/70C notconnected N/A

Attendere circa 5 minuti e rieseguire il comando

sh switch service-modules
Switch/Stack supports service module CPU version: 03.00.78

Temperature CPU
Switch# H/W Status (CPU/FPGA) CPU Link Version
—————————————————————–
1 OK 73C/73C connected 03.00.78

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x